Properties of an Insulator.

Properties of an Insulator.

Properties of an Insulator.

An insulator is a material which is a poor conductor of electricity or heat. Insulators can also be said to be simply material that does not conduct electrical current. Most electrical conductors are covered by insulation materials. Insulators possess a high resistivity and low conductivity. Their atoms have tightly bound electrons that do not move throughout the material. Because the electrons are static and not freely roaming, a current cannot easily pass. In addition to protecting loss of current, insulators make an electrical current more efficient by concentrating the flow.

Some common insulators include wood, plastic, glass, porcelain and Styrofoam; Styrofoam and plastic see wide use in household applications. Floors, roofs and basements often get urethane foam insulation, as it reduces heating costs by retaining heat in homes. A number of properties limit an insulator’s ability to conduct heat and electricity.

properties of an Insulator

Insulators are poor conductors of heat and electricity, due to tight binding of electrons in their atoms and molecules. Examples include air, rubber, Teflon, Styrofoam, cloth and fiberglass.

Important properties of an Insulator.

High Resistance

Insulators has the ability to impede electric current from passing through is known as electrical resistance; this property is measured in units called ohms. When 1 volt produces 1 ampere of current in an object, the resistance is 1 ohm. An ohm is a very small unit of resistance; a conductor might have a resistance of an ohm or two, whereas insulators have ohm measurements in the billions. All materials except superconductors have some resistance; conductors have low resistance, while insulators have high resistance levels.

Properties of an Insulator.

Breakdown Voltage

All insulators will conduct heat and electricity if subjected to extremely high voltages. At very high voltages, the material’s composition will lose its insulating abilities; the voltage at which this change occurs is known as the breakdown voltage, also known as dielectric strength.

Properties of an Insulator

As an example, consider air, normally an excellent insulator. Lightning passes through air because it’s very high voltage overwhelms, or breaks down, air’s ability to insulate. Different insulators have different breakdown voltages, and are used for different purposes. For example, plastic may be used as an insulator in households where the voltage is not very high, but it cannot be used for industrial purposes. Ceramic is one of the best insulators in such applications, as it has a very high breakdown voltage.

Atomic Structure of Insulators

In insulators, the valence (outer) electrons are tightly held together. When the movement of electrons is restricted, no current can flow, making substances with this property — for example, non-metals such as glass, wood and plastic — excellent insulators. This also impedes the flow of heat. The reason most liquids and aqueous solutions are not good electrical insulators is that they contain ions which allow electric current to flow; the same applies to wet plastic and wood.

Air Permeability

Air permeability, the ability of a material to allow air to flow through its pores, is a necessary property for some heat or thermal insulators. Good insulators have a high air permeability, since air itself is a good insulator. Examples include cloth, such as an oven mitt, and the fiberglass used in home heat insulation.

Related

What is an Insulator?

5 Types of Insulators Used in Transmission (Overhead) Lines

Share This Post
Have your say!
10

Customer Reviews

5
0%
4
0%
3
0%
2
0%
1
0%
0
0%

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

    Thanks for submitting your comment!